STORM-TEK SS8 – 8 -Person In-Ground Storm Shelter
An 8-person storm shelter is the ideal safety solution for the average Texas family, providing ample space for parents, children, pets, and essential emergency supplies. At Texas Storm Shelter Guy, our top-selling underground fiberglass model is engineered to provide exactly that peace of mind. Designed to exceed rigorous FEMA standards, this shelter combines the proven safety of a hardened structure with the comfort of molded seating and a low-maintenance, waterproof design, ensuring your family is protected from the most severe weather.
Product Specifications:
The STORM-TEK SS8 is a 5’5” wide x 6’8” long x 6’1” tall in-ground storm shelter, offering extra space and headroom compared to the SS6 model. Designed for durability, comfort, and maximum protection, this shelter provides ample room for occupants while maintaining a flush-mount, space-efficient design.
Key Features:
✔ 5” wider and 15” taller than the SS6 for added comfort
✔ Full phone service when placed near air vents
✔ Leak-resistant fiberglass construction for long-term durability
✔ Extra dirt placed on top during installation to allow for natural settling
Installation Requirements:
🔹 Hole size required: 10 ft wide x 12 ft long
🔹 Space needed to place excavated dirt during installation
🔹 Homeowners are responsible for leftover dirt (removal services available at an additional cost, to be arranged before installation)
Built for enhanced space and safety, the STORM-TEK SS8 offers proven storm protection with reinforced durability and a comfortable design for families seeking extra room and security.
(Starting At $8,750)
Storm-Tek SS8: Product Details & FAQs
The Storm-Tek SS8 in-ground storm shelter offers enhanced space, durability, and protection for families needing a secure refuge during severe weather. In this section, you’ll find detailed product specifications, installation requirements, and answers to common questions. Learn how this larger, reinforced shelter provides long-term safety, a flush-mount design, and essential features to keep your family protected when it matters most.
Product Demo
What Can Affect The Price?
The quoted price is assuming that you are within 75 miles of Sherman, TX, 75090
We go all over the state of Texas and Louisiana. There is an extra charge for mileage this is something that we have to quote based upon what city you live in.
—
Jack hammering and Rock Removal
The quoted price assumes excavation to the proper depth (as specified in the plans) without needing a jackhammer. Should jackhammering be necessary due to unforeseen rocky conditions to reach the required depth, an additional 1,000 fee will be applied. While most jobs require only one day of jackhammering, If jackhammering extends into a second day due to unforeseen circumstances or increased complexity, an additional $1,000 fee will be applied.
Required Access
7-ft width.
During the installation, we carry the shelter onto the property with a mini excavator. In some situations, we have lifted the shelter higher than the fence on the side of the house and driven it into the backyard. So, depending upon the site and the location, width does not always determine everything if we can lift the shelter higher to get it in. If there is a wooden fence, typically one panel is removed and then reinstalled when the job is complete. Sometimes there is a gate on the side of a house and we have to take out the gate along with the two posts to do the installation and then put it back when we are done. It is an additional cost.
Installation
Typically 5-6 hours.
We bring the shelter and the anchoring system on a 25-foot flatbed trailer with an excavator.
Depending on the job site-location, sometimes we park in the street and carry everything into the backyard. Other times, we drive into the backyard with the equipment. It depends on the job.
All shelters are installed with an anchoring system that prevents the shelter from floating out of the ground.
Anchoring System
The anchoring system was engineered by the factory that has been manufacturing since 1998. It is a proven system that works very well.
Any shelter with no anchoring system can float out of the ground. This is not a problem that we experience because we have a proven system.
Ventilation
The ventilation for the shelter is protected by the door.
The benefit to this is that when debris falls on top of the door it does not block ventilation no matter what gets thrown on top you will still always have air ventilation. This video shows the ventilation system and the locking mechanism.
Water Retention And Flooding
Proper site preparation or selecting the right location and elevation for the shelter will ensure that water cannot come inside the unit through the ventilation system. If there is standing water in your selected shelter location then a new location would need to be selected or raise the elevation in that area with the leftover dirt from the installation.
Elevation of the shelter installation can help overcome standing water issues. The only way for water to get in through the ventilation system is for the water level to rise up to 5 inches deep next to the ventilation system.
This is not something common in a normal backyard setting.
Weather Conditions
Ground conditions can vary greatly depending on location and weather. To ensure the best decision, we’ll call you in advance to discuss your specific location and the expected ground conditions. Even if rain is forecast overnight, it doesn’t automatically mean a delay. In some locations, heavy rain can saturate the ground, making it unsafe to proceed with installation. For other locations, the ground may remain firm and installation can still happen as planned. We’ll work with you to determine if the ground is safe to proceed on, prioritizing a smooth and successful installation. If there’s any uncertainty, we’ll reschedule to ensure optimal conditions.
Manufacturer
At the factory, we manufacture and finish all of our underground products in the same facility. We do not outsource any of our fiberglass products. That’s what has made us successful for more than 20 years. In September of 2001, we had designed a certified door system that was subject to debris impact testing at Texas Tech University.
Specs